Mission XV
-
Mission XV KRMA RDA
Der KRMA RDA aus dem Hause Mission XV ist ein kleiner, aber feiner 22mm RDA mit einigen tollen Features. Neben seiner tollen äusseren Ästhetik, ist auch das Innere eines Blickes würdig. Das Single Coil Deck des KRMA RDAs besteht aus 2 Posts, die in den Rand des Decks eingelassen sind. Durch dieses Design bietet der Mission XV KRMA RDA eine grosse Liquidwanne.
Der seitliche Airflow ist so ausgelegt, dass er die Luft von beiden Seiten her direkt auf die Wicklung treffen lässt und so ein Maximum an Geschmack erzeugt. Zudem wurde die Luftzufuhr so konzipiert, dass durch das abgestufte Design kein Liquid rauslaufen soll. An den beiden Posts kommen grosse Schlitzschrauben zum Einsatz, zudem ist das eine Posthole seitlich geschlossen, was ein rausrutschen der Wicklung verhindert.
Ein tolles Feature ist zudem, wie einfach sich der KRMA RDA vom BF-RDA zum normalen RDA umwandeln lässt. Dazu wird einfach von unten her in den 510 Pin eine Madenschraube hineingedreht, schon lässt sich der Mission XV KRMA RDA als normaler Tröpfler nutzen. Es sind solche Detaillösungen, welche den KRMA RDA zu einem ganz besonderen RDA machen. Zudem lässt sich der KRMA RDA auch optisch dem eigenen Geschmack nach anpassen, denn Mission XV legt ihm nebst dem Edelstahl Top Cap auch noch ein schwarzes Delrin Top Cap bei, ebenso nebst dem schwarzen Delrin Drip Tip noch eins aus Ultem.
Learn More -
Mission XV Daywon RDA
The American manufacturer Mission XV, known for the popular KRMA RDA, has launched a dropper in cooperation with the liquid manufacturer Coil Vapes: the Daywon RDA. The vaporizer is supplied in the same way as the KRMA, sealed in a transparent bag, so that you can get a glimpse of the deck, beauty ring and top cap before unpacking.
Learn More
The Mission XV Daywon RDA is designed as a 22mm single coil RDA, whereby the main focus of the makers was on taste. The Top Cap is not a one-piece RDA like other RDAs, but Mission XV gives the Daywon RDA a two-piece Top Cap. This consists of the top and the AFC ring. With the AFC ring the airflow can be regulated continuously, so that you can steam the Mission XV Daywon RDA from restrictive to completely open.
After removing the top cap, the deck of the dropper is revealed. Unlike the KRMA, Mission XV has changed the deck design of the Daywon. Instead of two opposite posts, both posts are placed on one side as part of the deck rim. Between the two posts is an insulator. The postholes of Mission XV Daywon are large enough to accommodate thicker wires. Allen screws are used to fix the winding. Opposite the posts is the opening for the air supply, this too was integrated into the edge of the deck. The air supply of the Daywon was chosen in a way that the RDA does not run out easily if you press too hard on the squonker bottle.
The Mission XV Daywon RDA comes with a pre-installed Bottom Feeder Pin and if you are looking for a regular pin in the bag, you will do so in vain. Because Mission XV offers a simple solution: on the underside of the deck there is an Allen screw and this is screwed into the hole of the BF pin, and the squoncable RDA has already become a normal RDA. With the Daywon RDA, Mission XV and Coil Vapes have launched a vaporizer that is convincing in many respects.Regular Price: CHF109.90
Special Price CHF79.90
Delivery Time: 2-3 Arbeitstage
-
Mission XV Daywon RDA Black Delrin Body
Mission XV has launched this beautiful Black Delrin body kit for the Daywon RDA. The kit consists of a beauty ring, top cap and the AFC ring. The material used is black Delrin.
Learn MoreRegular Price: CHF54.90
Special Price CHF49.90
Delivery Time: 2-3 Arbeitstage
-
Mission XV Daywon RDA Actylic Slammed Cap
Mission XV has another top cap for the Daywon RDA, but this time as a Slammed Cap. The Frosted Clear Acrylic Slammed Cap not only reduces the height of the Daywon, but also allows a different taste experience. The Mission XV Daywon RDA Acrylic Slammed Cap has an integrated drip tip.
Learn More -
Mission XV DotMission RBA
Die DotMission RBA aus dem Hause Mission XV ist eine RBA für die beliebte DotAIO von DotMod. Die Mission XV DotMission RBA deckt ein breites Spektrum ab und kann sowohl MTL als auch RDL bis DL genutzt werden. Die Einheit besteht aus zwei Hauptteilen: der Tanksektion und der basis mit dem Deck. Die Basis lässt sich dabei auch mit noch vollem Tank von der Tanksektion trenen, so dass man zum wechseln der Wate oder der Coil nicht erst den Tank leeren muss.
Zieht man die Basis heraus, kommt das Deck der DotMission RBA zum Vorschein. Dieses ist im klassischen 2-Post Style gehalten, wobei Mission XV ein Augenmerk darauf gelegt hat, dass die Drahtenden ohne Probleme abgeschnitten werden können. Dazu verfügt das Deck an den Posts über entsprechende Ausschnitte. Seitlich befinden sich die beiden Taschen für die Watte, wobei diese ebenfalls grosszügig ausgelegt sind. Auch der Raum zwischen den beiden Posts lässt die Nutzung von etwas grösseren Coils mit einem Innendurchmesser von bis zu 3mm zu. Befestigt wird der Draht mit klassischen Schlitzschrauben.
Der Airflow wird bei der Mission XV DotMission RBA über Airflow Inserts realisiert Die RBA wird mit 3 eliefert: 1x 1,2mm, 1x 2,1mm und 1x 3,5mm. Die Inserts können ganz einfach von unten her in das Deck geschraubt werden, dadurch kann man auch on-the-fly zwischen den Airflow Inserts wechseln ohne jeweils die Coil entferne zu müssen. uch der Befüllvorgang ist bei der DotMission RBA sehr einfach: an der Vorderseite befindet sich die Öffnung, welche durch einen Silikonstopfen verschlossen wird.
Video zum wickeln der DotMission RBA: Learn More