Dampfen

The Smok TFV8 V8-T8 coils are the largest coils for the V8 and they are octuple coils, having eight wrapped coils inside of each pre-built replacement coil head. These coils are for the vapers that want the most amount of vapor production without having to build your own coils on the RBA deck.

These TFV8 coils are the most popular and they push this tank to its absolute max. This coil is rated at 0.15ohms and the recommend wattage range on this coil is 50-260W, but the best range is 120-180 watts.

- V8-T8 the patented Octuple replacement coil. With 8 windings / coils this evaporator head produces a lot of steam and taste.
0.15 Ohm loadable from 50 - 240 watts, best use at 120 - 180 watts.

- V8-T6 the patented Sextuble Spare Coil. With 6 windings / coils also this evaporator head full gas with incredible steam and mess output.
0.2 Ohm loadable from 50 - 240 watts, best use at 110 - 150 watts.

- V8-Q4 the patented quadruple replacement coil. With 4 windings / coils, this evaporator head transforms each room into a mist cavity.
0.15 Ohm loadable from 50 - 180 watts, best use at 90 - 150 Watts.

The Smok V8 Baby and Big Baby Beast Coils / Evaporator Heads are compatible with the Smok TFV8 Baby Beast Tank. And the Smok TFV8 Big Baby Beast Tank.

Please select your desired Smok V8 Baby Coils / Evaporator Heads from the pull-down menu.

Product details:

Smok V8 Baby X4 Coils 0.15Ohm Quadruple Coil 30-70W / Best: 45-60W
Smok V8 Baby-Q2 Coils 0.4Ohm Dual Core 40-80W / Best: 55-65W
Smok V8 Baby T8 Coils 0.15Ohm Octuple Coils 50-110W / Best: 60-80W
Smok V8 Baby RBA Installed 0.3Ohm Clapton plus 1x V8 Baby RBA Core, 1x V8 RBA Exlusive Glass Tube, 1x Cross Screwdriver, 4x Replacement Screws, 2x Sealing Rings

The Invictus Guardian from Egoist Flavors is the perfect protection for your beloved vaporizer. Made of high-quality stainless steel, nothing can upset the Invictus Guardian so quickly. The tank protection can be opened from both sides, and there is a 510 thread in each lid. So you can store either one large evaporator or two small ones (e.g. two RDAs or short tanks) in the Egoist Flavors Invictus Guardian. Even large vaporizers like a Vapor Giant V5L have room in the Invictus Guardian.

The Vaporesso VM Tank series can be perfectly selected as your own battery carrier thanks to three different diameter sizes 18mm, 22mm and 25mm.
Depending on the tank size, the Vaporesso VM vaporizers have 2 to 3ml liquid volume. The 18mm tank is completely transparent. The 22mm and 25mm tanks are made of metal with liquid viewing window. To fill the desired E-Liquid into the tank, simply unscrew the lid with the mouthpiece and the filling hole appears. The airflow system is installed at the bottom of the tank and can be adjusted with the rotating ring to the desired draft.

The Vaporesso VM tank is best suited for MTL/backend steamers.

All evaporator heads/coils from the Vaporesso EUC series fit into the VM tanks. Whether ceramic, mesh or a regular coil. Depending on the steam behaviour with resistances of 0.3 / 0.4 / 0.6 / 1.0 Ohm and different watt power ranges.

The Code Vapor - Very Vanilla Custard is not a typical Vanilla Custard the additional aromas of roasted almonds and Bourbon Whiskey make it unique.

The Xtar VP2 is a modern and intelligent 2-slot charger, which is also versatile. The Xtar VP2 can be operated with a 230V power supply unit on the one hand and with a 12V car power cable on the other hand (both cables are included in delivery). The charger not only charges a wide variety of lithium batteries, but also allows the Xtar VP2 to be used as a power bank. To do this, you put a full battery into slot 1, connect the corresponding USB cable to the rear USB port and you can already charge your mobile phone, for example.

A special feature of the Xtar VP2 is the switch on the back of the charger. There you can set the voltages for LiFePo4 (3.2V for LiFePo with 3.6V charge cut-off voltage), LiIon (3.6V for LiIon with 4.2V charge cut-off voltage) and LiIon (3.8V for LiIon with 4.35V charge cut-off voltage). The Xtar VP2 has 3 different charging currents: 0.25A, 0.5A and 1A . The charging current can be easily adjusted by the button above the display. The clear display shows either the battery status or the battery voltage in real time at any time.

Despite its compact size, the Xtar VP2 can charge most commercially available LiIon batteries, from 10440, 18650, 20700/21700 to 26650, making this charger an ideal travel companion.

After the Brunhilde and the Brunhilde MTL, Vapefly has now also launched a Sub-Ohm finished coil, the Vapefly Kriemhild Sub-Ohm. The Kriemhild is a bit like its predecessors, i.e. a rather simple design with beautiful engraving on the body. But in contrast to the Brunhilde, the Kriemhild is not a self-winder, but a finished coil. The Vapefly Kriemhild is probably one of the bigger tanks with a height of 55,5mm and a diameter of 26mm (please check if there is enough space on the battery carrier).

The Vapefly Kriemhild has a modern Top Fill System, where you simply slide the top backwards and the filling hole appears. But to prevent it from moving by itself, Vapefly has equipped the Kriemhild with a child lock. Before you can push the top backwards, you first have to pull it up a little. The airflow is designed as a so-called bottom airflow and can be continuously adjusted. The coils can be changed as easy as with the Nicolas Tank from the same company, because they are just plugged in. You unscrew the base, pull out the old coil and put in the new one, ready.

Vapefly has also kept the coils rather simple and instead of offering countless different coils, Kriemhild has three: Single Mesh, Dual Mesh and Triple Mesh. While the Single and Triple Mesh each use a Ni80 Mesh, the Dual Mesh uses a KA1. And Vapefly has paid attention to even the smallest details, because for the Kriemhild in black and gold there are matching coils in gold.

Heathen and The Vapor Chronicles have together developed the successor to the popular Dead Rabbit RDA.

The Hellvape Drop Dead RDA!

Thanks to the generous deck, even larger coil windings can be installed without any problems. With its 24mm diameter there is enough space. Whoever enjoys it can install up to three coils. The Airflow can be adjusted perfectly to your own pulling behaviour by simply turning the upper ring. Even when the Airflow is completely open, a small pulling resistance remains. This results in a very full, pleasant and silky steam feeling. The taste development is also excellent and due to the high air grids, even when dripping strongly, the liquid will not leak out.

For all squonker friends a matching pin is included in the delivery of the Drop Dead RDA.

The processing and the optics are exemplary. The Top Cap fits perfectly and offers the right hold. The grippy Airflow ring can be turned very comfortably and still has an excellent fit.

The Hellvape Drop Dead RDA can not only inspire with its great taste and velvety steam. It also looks great and is fun to wrap.

The Vaping in Paris Tarte Citron Meringuée (the old name was "Lemon Tart") tastes dreamlike, sweet and super delicious after a freshly prepared lemon meringue cake.

All Vaping in Paris e-Liquid are made from high quality natural flavours. (No nature identical or artificial flavours!)
Important for allergy sufferers! The Vaping in Paris e-Liquids are produced from herbal propylene glycol and glycerine!