Various

This Spuape X Tank Estension is a tank extension for the SquapeX, Squape X [s] and Squape X nano vapors by Stattqualm. The capacity increases with each tank extension by 2.5ml.

The assembly is very simple - simply unscrew topcap and unscrew the tank extension.

The MTL Kit 1.3 / 2.0 / 2.5mm SQuape E reduces the direct air supply to the windings and has been specially developed for mouth-to-lung steamers.

Installation: Select the preferred size and screw it into the deck We or Be from below. For this you need a 2.5mm Allen key.

The Power Single Coil Deck! The "Be" SQuape E deck is characterized by its wide cotton pockets and extended options. Try on this deck many different windings. The deck is excellent for cotton wool. Insert a pin with a diameter of up to 3.5mm into the two notches and attach the wire ends to the brackets. Then pull the cotton wool through the winding and shorten the cotton wool to the length of the base. Put the cotton wool into your pockets - done. Absolutely simple and simple.
For mouth-to-lungs: please use the MTL kit and screw it from below into the deck. For this you need a 2.5mm Allen key.

Recommended for this deck: 0.25 - 2.0 Ohm / 10 - 75 W

Das DualCoil Deck! Geeignet für den erfahrenen Dampfer. Das Deck "De" SQuape E zeichnet sich durch seine zwei breiten Kanäle und den beiden Luftführungen direkt zu den beiden Wicklungen aus. Das Deck ist für Watte, Faser und Mesh hervorragend geeignet. Legen Sie zwei Stifte mit bis zu 3mm Durchmesser einfach die beiden Kanäle und befestigen Sie die Drahtenden im selben Moment an den Halterungen. Danach ziehen Sie die Watte durch die Wicklungen und kürzen die Watte auf die Länge des Decks (schräg zum Deck schneiden). Die Watte noch etwas ausrichten. - fertig.
Nutzen Sie beide Luftöffnungen der AFC für den leichten Luftzug oder stellen Sie ihn nach Ihren Wünschen ein.

Empfehlung für dieses Deck: 0.25 - 1.0 Ohm / 20 - 75 W

Center contact SQuape E and X incl. O-ring. Centerpin SQuape E.

Replacement set SQuape E with O-rings and spare screws for the SQuape E.

Replacement borosilicate glass for the SQuape E [motion] 4.5ml

The SQ Grip Band!

The little helper in the daily steamer life. Do you have a fixing artifact or is your evaporator chopped on an accumulator? Then the practical and useful SQ Gripband will help you.

Mini plastic slotted screwdriver. The tip has a size of 1.5mm and fits perfectly to the slotted screws for the SQuape X [dream] and X [s].