E Zigaretten Shop

The Italian manufacturer DB Mods, known through the Royal RDA, has now also launched a luxury class RTA. The DB Mods Lord RTA fits thanks to its diameter of 22mm on a variety of mods and also in the height the Lord RTA is thanks to 36mmm rather one of the more compact RTAs.

The DB Mods Lord RTA is made of high-quality SS316, as tank glass Pyrexglas is used. The evaporator is designed for the use of single coils. The deck of the Lord RTA is designed as a postless deck. The two allen screws for fixing the coils are hidden on the sides. To get to these screws, you first have to remove the AFC ring, then the outer ring of the base and the screws placed on the side of the deck are revealed.

Between deck and tank section there is another chamber made of PEEK, which on the one hand leads the air to the coil and on the other hand contains the two openings for the liquid supply. The DB Mods Lord RTA offers a wide range of uses, from open to restricted DL and MTL. In order to be able to offer this variety of uses, the AFC ring of the Lord RTA has different air holes. When fully open the air is transported through 2x 2mm holes to the winding, while in the smallest setting 1x 1.2mm provides the air supply.

The tank volume of the vaporizer holds 4ml, which in combination with the use of single coils should ensure a long steam pleasure. With the Lord RTA, the Italian manufacturer DB Mods has once again brought a fine piece to the market, which is convincing thanks to numerous detailed solutions.

The Dani Box 21700 from Dicodes is the youngest member of the Dani family. While the manufacturer has kept the simple design, the Dani Box 21700 can now be fired by a 20700 or 21700 battery (not included). In watt mode, the battery carrier delivers a power of 80W, whereas even 100W is possible with the power boost function (depending on the battery and the battery's state of charge).

Like its little brother, the Dicodes Dani 21700 offers a high quality stainless steel case, a clear OLED display on the top and the easily accessible keys on the narrow side. Like the smaller Dani Mini, the Dani 21700 also has the temperature mode, for which the chip from Dicodes is known.

The Dani Box 21700 is of course predestined for fans of temperature controlled steaming thanks to its Dicodes chip. All TC-compatible wires are supported, whereby Dicodes recommends its own Resistherm NiFe30 wire.

The German manufacturer is known for its precise and high-quality chip, which is used in the Dani Box Mini. The Dicodes Dani Box Mini is especially well suited for temperature controlled steaming, one of the strengths of the Dicodes chip.

The Dani Box Mini requires 1x 18650 battery (not included) for operation, so a maximum power of 80W can be achieved. Of course, the Dicodes Chip offers much more than just watt mode and temperature control, so the Dicodes Dani Box Mini also has 10 Power Boost modes and 10 Heater Protection modes. The Dani Mini can also be used in bypass mode.

The Dani Mini is made of high quality stainless steel and has a spring loaded copper-beryllium center pole. On the top side of the battery carrier is the clearly arranged OLED display, which informs about all important settings at any time. The fire button as well as the plus and minus buttons are ergonomically located on the side, which contributes to the simple look.

Another special feature of the Dicodes Dani Box Mini is the charging port on the underside, through which the battery can be charged with the optionally available charging cradle. All in all, the Dani Box Mini is a high-quality battery carrier of the upper class, which offers an almost endless variety of adjustment possibilities and can score with its simple design.

With the Taifun GTR, Smokerstore once again relies on proven concepts and combines them with new aspects to meet the needs of users. Despite its low height, the Taifun GTR is equipped with a Top Fill System, Liquid Control and a variable Air Flow Control. For the first time in a Taifun vaporiser, the Top Cap completely dispenses with a thread. The new quick release fastener is extremely robust and user-friendly. The tank can be opened and closed with just a minimal turn without missing the slightest impression of high quality.

With regard to DIN CENTS 17287, we looked for an alternative to the well-known transparent plastic tanks and glass, with success. For the first time, the Taifun GTR will again be delivered with a plastic tank. The material used, polysulfone (PSU), is a transparent plastic which belongs to the group of high temperature resistant high-performance thermoplastics. In a temperature range from -100°C to 190°C the tank is hard and its ignition temperature (by a flame) is almost 500°C. In addition, it has extremely high chemical resistance and has survived all previous tests with the well-known "Tank Crackers" without any damage or stress cracks.

The Taifun GTR has two separate air ducts. In the basic version the cross sections of the ducts are 1.0mm and 1.2mm. Using the ball bearing supported AFC, both ducts can either be opened completely or halfway individually, or completely or halfway together. The AFC ring of Taifun GTR has a stop in both directions. However, the intelligent arrangement of the air holes means that there is no adjustment from small to large. The adjustment path is kept as short as possible and the outer opening is always only exposed, halved or closed by clicking to the right or left (depending on the selected air hole). In order to save installation height, the ribbed AFC ring is also used to mount / dismount the evaporator. The possibilities of the AFC allow a wider range in the restrictive steam range without much effort. Both lovers of the classic, very strict, MTL as well as advocates of the very restrictive DL steaming can adjust the air supply to their personal needs without having to accept compression losses under the winding.

The Taifun GTR is designed for versatile use in the restrictive range. This is reflected in the new arrangement of the Liquidcontrol. One user steams thinner liquids with less power and higher negative pressure and the other more viscous liquids with more power and more air. To meet these requirements, a Liquidcontrol is needed which can be adapted to the individual needs of the user within a certain range. Simply turning up the volume further is not enough for a satisfying vapor experience in the range of MTL and restrictive DL. The left liquid channel is optimized for 50/50 liquids at a restrained performance and higher negative pressure in the chamber. Due to the narrower and higher riser channel, the chamber is not flooded even under the above mentioned conditions. The right channel is suitable for 70/30+ liquids with increased performance due to its wider milling and lower riser height. For longer pull times, both channels can be opened here. The Liquid Control is adjusted by simply twisting the tank. 4 cut-outs for the accesses on both sides allow a very short rotation in the circumference, no matter where the beginning of the threads starts.

The wraparound deck of the Taifun GTR is the logical continuation of the "Taifun deck" introduced with the GT IV. The wire holders correspond to those of the Taifun BTD with the improved lugs for easier wire pick up. The 2-sided ventilation introduced with the Taifun GT IV has also been adapted to the requirements of a purebred restrictive vaporiser. Both air ducts exit at a slight angle under the coil and allow variable adjustment of the coil to the user's individual needs in terms of taste and "flash". In principle, "keep it simple" also applies to the Taifun GTR. The deck does not require any great coiling skills or cotton wool laying techniques for an optimal steaming experience. Simply install the coil, pull the cotton wool through and place it in the bag.

The Justfog Q16 Pro Kit trumps with the new Q16 tank with a capacity of 1.9ml liquid which can now be easily filled from above. Simply unscrew the lid and fill the preferred e-liquid into one of the left and right holes. The Airflow can be re-adjusted with a slider. Thus, an identical puff feeling can be adjusted as a cigarette. The evaporator heads for best taste with 1.2 and 1.6 ohms remain the same as the predecessor model.

The battery charger with 900mAh in a new design is a bit sleeker and more elegant. The power is newly set with a 4-point LED display (3.5, 3.8, 4.1 and 4.4 volts). The integrated LED light in the fire button precisely indicates the battery level by means of a white, blue or red light. In addition, the battery carrier can be recharged with the included USB charging cable in about 45 minutes. Of course, the Justfog Q16 Pro Set is equipped with all protection devices such as short circuit protection, temperature protection, overheat protection, overvoltage protection and overcharge protection for safe vaping. Also, with this e-cigarette high-dose liquids can be vaped with nicotine salt. Similar to the POD systems but with the great advantage that the preferred settings can be adjusted and you are absolutely free in the choice of your preferred e-liquid.

The new Justfog Q16 Pro is a great part. We have extensively tested them and are especially impressed by the new Top-filling system.

Fits perfectly in every pocket!

If you have any questions or for a professional consultation, you are always welcome in one of our shops in Zurich or Winterthur.

Matching the Justfog Q16 Pro or the predecessor model Jusftog Q16 battery carrier, the brand new Justfog Q16 Pro Tank.

The Justfog Q16 Pro Clearomizer trumps with the new Q16 tank with a capacity of 1.9ml liquid which can now be easily filled from above. Simply unscrew the lid and fill the preferred e-liquid into one of the left and right holes. The Airflow can be re-adjusted with a slider. Thus, an identical puff feeling can be adjusted as a cigarette. The coil heads for best taste with 1.2 and 1.6 ohms remain the same as the predecessor model.

Der Vandy Vape Triple Fused Clapton NI80 Draht mit 3 Meter Länge aus hochwertigem Nickel-Chrom mit einem Widerstand von 1,58 Ohm /ft. und einem Durchmesser von: 28ga*3(=)+38ga. Triple Fused Clapton Draht besticht durch seine starke, geschmacksintensive Dampfentwicklung und durch seine Reaktions-Fähigkeit sich sehr schnell zu erhitzen. Ein Triple Fused Clapton ist ein Wickeldraht bestehend aus drei Kern-Drähte welch mit einem weiteren Draht Umwickelt wird.

Hier noch die Umrechnung von Gauge in Millimeter:

30 Gauge = 0,255mm
28 Gauge = 0.321mm
26 Gauge = 0.404mm
24 Gauge = 0.511mm
22 Gauge = 0.643mm
20 Gauge = 0.813mm
18 Gauge = 1.02mm

The Geekvape Zeus Subohm Tank with leak-proof top airflow has a tank volume of 5ml and 3.5ml with the supplied straight glass. The diameter of the Zeus Subohm vaporizer is 25mm. Preinstalled is a Mesh Z2 Coils / Evaporator head with 0.2 Ohm resistance and an optimal power range of 70 - 80 Watt. In addition, the Mesh Z1 with 0.4 Ohm and a power range of 60 - 70 Watt is a second coil in the set. Filling the tank from the top is lightning fast and super easy thanks to the 1/4 twist bayonet lock of the Topcap. For me the safest and most comfortable solution. The mouthpiece / driptip is comfortable and fits perfectly. Of course, it can be replaced by another 810 driptip at any time. The airflow can be adjusted at the top by turning the ring to suit your own draught needs. Thanks to the ingenious Airflow system the tank cannot leak and the coil is additionally cooled.

The Geekvape Zeus Subohm Tank with its two mesh coils garnished for DL / direct lung steamer a maximum aroma and steam experience.

The Easy Side Box Mod 60W from Ambition Mods and Sunbox - R.S.S. was created by a cooperation of these three companies and convinces by its design as well as the price-performance ratio. The battery carrier has a so called side-by-side design, where the vaporizer is mounted slightly recessed and thus allows a compact combo. The Ambitions Mod Easy Side Box 60W is operated with 1x 18650 (not included), so that up to 60W can be called up in power mode. The battery can be easily inserted from above.

The battery carrier supports the power mode and temperature control (Ni, Ti, SS). The keys for firing and plus/minus are located on the short front. The display of the Ambition Mods Easy Side Box 60W is located on the bottom of the battery carrier. The display and the menu navigation is similar to a well known chip from the USA.