Verdampfer - Fertigcoil

Justfog Q16 tank fits the Justfog Q16 battery carrier or battery carrier with a 510 thread.

Neu aus dem Hause Uwell kommt der Valyrian Verdampfer, welcher nahtlos an den Crown 3 anknüpft. Dabei hat der Uwell Valyrian Tank einige Features zu bieten. Da wäre zum Beispiel die 3 wechselbaren Coil Pins, über welche sich der Airflow direkt beeinflussen lässt oder dann das Top Cap mit Hitzeisolierung, welches auch bei hoher Leistung ein angenehmes dampfen ermöglicht und natürlich auch das optisch zum Tank passende Drip Tip, welches jeweils in 2 Farben beiliegt. Eine weitere Besonderheit am Top Cap ist die Befüllmöglichkeit: musste man beim Crwon 3 noch das Top Cap abschrauben, so verfügt der Uwell Valyrian über ein Flip Cap. Einfach den kleinen Knopf drücken, schon springt das Top Cap auf und lässt sich nach hinten wegklappen.

Der Uwell Valyrian kommt mit einem 5ml Tank daher, kann aber mit dem optional erhältlichen Tankglas auf 8ml Volumen erweitert werden. Eine weitere Besonderheit sind die neuen Verdampferköpfe, welche mit vierfacher Kanthal A1 Wicklungen daherkommen und mit ihrem Widerstand von 0,15 Ohm für einen Leistungsbereich von 90-120Watt gemacht sind. Wie schon beim Crown 3 muss man auch beim Valyrian die Verdampferköpfe nicht schrauben, sondern kann diese einfach einstecken. Der Valyrian verfügt über einen Bottom Airflow, der sich stufenlos einstellen lässt.

Wer also auf der Suche nach einem Tank ist, der sich selbst im hohen Wattbereich noch angenehm dampfen lässt, der sollte sich den Uwell Valyrian unbedingt mal anschauen.

The Innokin Zenith MTL tank is the perfect companion for all MTLs looking for an uncomplicated, reliable and tasty vaporizer. Available are a 22mm version with a generous 3ml tank volume and a 25mm version with a full 4ml liquid volume which is one of the more generous tanks among the MTL vaporizers. Both vaporizer sizes can be filled very comfortably from above by turning the tank cap, which opens the e-liquid filling hole.

With the comfortable Airflow adjustment ring at the end of the tank it is easy to find your personal favorite airflow.

Changing the vaporizer heads (coils) is also very easy. Just unscrew the bottom and pull out the coil and put the new vaporizer head back in place, screw on the cover and you're done! No liquid massacre as the liquid cannot leak out during the coil change.

The Innokin Zenith MTL vaporizer with 22mm diameter is equipped with the new Plexus Z 0.5 Ohm coil which can be loaded with 14 -19 Watt power. The KAL 1.6 Ohm coil (10 - 14 Watt) is also included in the set.

The Innokin Zenith MTL vaporizer with 25mm diameter comes with the KAL 1.6 Ohm coil (10 - 14 Watt) pre-installed. The set also includes the KAL vaporizer head with 0.8 Ohm (15 - 18 Watt).

All Zenith coils are compatible with each other and provide for enjoyable baking.

Absolutely recommendable MTL vaporizer, TOP!

The Vaporesso VM Tank series can be perfectly selected as your own battery carrier thanks to three different diameter sizes 18mm, 22mm and 25mm.
Depending on the tank size, the Vaporesso VM vaporizers have 2 to 3ml liquid volume. The 18mm tank is completely transparent. The 22mm and 25mm tanks are made of metal with liquid viewing window. To fill the desired E-Liquid into the tank, simply unscrew the lid with the mouthpiece and the filling hole appears. The airflow system is installed at the bottom of the tank and can be adjusted with the rotating ring to the desired draft.

The Vaporesso VM tank is best suited for MTL/backend steamers.

All evaporator heads/coils from the Vaporesso EUC series fit into the VM tanks. Whether ceramic, mesh or a regular coil. Depending on the steam behaviour with resistances of 0.3 / 0.4 / 0.6 / 1.0 Ohm and different watt power ranges.

The Aspire Tigon Tank with 3.5ml liquid filling volume is ideal for around or beginner steamers who are not yet sure whether they are DL (direct lung steamer) or MTL (back steamer). Thanks to the airflow ring which can be regulated from individual air holes to the entire air slot and the two different evaporator heads (coils) with the resistances 1.2 Ohm (MTL) and 0.4 Ohm (DL), both types of steamer can be tested with one tank.

Suitable for both types of steam, two different mouthpieces are included in the set.

The e-Liquid is filled into the tank from the top. Pull up the child safety ring at the lid and push it backwards and the filling hole appears.
The Aspire Tigon tank also has a liquid stop function when the coil is pulled out. This prevents the liquid from running out when changing the coil. Suitable for the two types of steam two different mouthpieces are included in the set.

The Geekvape Zeus Subohm Tank with leak-proof top airflow has a tank volume of 5ml and 3.5ml with the supplied straight glass. The diameter of the Zeus Subohm vaporizer is 25mm. Preinstalled is a Mesh Z2 Coils / Evaporator head with 0.2 Ohm resistance and an optimal power range of 70 - 80 Watt. In addition, the Mesh Z1 with 0.4 Ohm and a power range of 60 - 70 Watt is a second coil in the set. Filling the tank from the top is lightning fast and super easy thanks to the 1/4 twist bayonet lock of the Topcap. For me the safest and most comfortable solution. The mouthpiece / driptip is comfortable and fits perfectly. Of course, it can be replaced by another 810 driptip at any time. The airflow can be adjusted at the top by turning the ring to suit your own draught needs. Thanks to the ingenious Airflow system the tank cannot leak and the coil is additionally cooled.

The Geekvape Zeus Subohm Tank with its two mesh coils garnished for DL / direct lung steamer a maximum aroma and steam experience.

Aspire and Smokerstore, two big names in the steamship scene, joined forces for this vaporizer and the result was the Aspire Nautilus GT. Smokerstore's design is based on their Taifun GTR, so the Nautilus GT has the same top filling system as the Taifun GTR. Thus the Nautilus GT can be filled very comfortably and quickly. The Aspire Nautilus GT has a tank volume of 3ml, but this can be expanded to 4.2ml with the PSU tank glass (sold separately).

In contrast to its predecessors, the new Aspire Nautilus GT has a diameter of 24mm (please measure whether it fits on battery carriers). The coils used are the BVC coils already known from previous Nautilus models. However, a new addition is the 0.7 Ohm mesh, which is already pre-installed. The Aspire Nautilus GT is made of high-quality stainless steel, Pyrex (tank glass) and PEI (drip tip).

A special feature of the Nautilus GT is certainly its bottom airflow. This has, similar to the original Nautilus, 5 air holes of 1.0mm to 2.5mm in diameter. To adjust the airflow, you only have to turn the AFC ring and thanks to the tactile ratchet, you don't have to worry about a misaligned airflow. With the Nautilus GT, Aspire proves once again that even with a simple design, you can create a great vaporizer.

After the Brunhilde and the Brunhilde MTL, Vapefly has now also launched a Sub-Ohm finished coil, the Vapefly Kriemhild Sub-Ohm. The Kriemhild is a bit like its predecessors, i.e. a rather simple design with beautiful engraving on the body. But in contrast to the Brunhilde, the Kriemhild is not a self-winder, but a finished coil. The Vapefly Kriemhild is probably one of the bigger tanks with a height of 55,5mm and a diameter of 26mm (please check if there is enough space on the battery carrier).

The Vapefly Kriemhild has a modern Top Fill System, where you simply slide the top backwards and the filling hole appears. But to prevent it from moving by itself, Vapefly has equipped the Kriemhild with a child lock. Before you can push the top backwards, you first have to pull it up a little. The airflow is designed as a so-called bottom airflow and can be continuously adjusted. The coils can be changed as easy as with the Nicolas Tank from the same company, because they are just plugged in. You unscrew the base, pull out the old coil and put in the new one, ready.

Vapefly has also kept the coils rather simple and instead of offering countless different coils, Kriemhild has three: Single Mesh, Dual Mesh and Triple Mesh. While the Single and Triple Mesh each use a Ni80 Mesh, the Dual Mesh uses a KA1. And Vapefly has paid attention to even the smallest details, because for the Kriemhild in black and gold there are matching coils in gold.

The Innokin Zenith Pro tank with 5.5ml liquid filling capacity comes with some new and helpful innovations.

New is that when the coil/evaporator head is removed from the tank, the liquid channel to the tank closes. This means that the coil can be easily replaced even when the tank is full without the risk of the liquid leaking out.

Furthermore, an ingenious function is built in which, as soon as the top cap is opened to fill the tank, the channel between coil and tank is closed by the built-in turning mechanism. This prevents the most common cause of liquid leakage.

The two opposite airflow openings are also optimized for MTL (back steam, similar to pulling a cigarette) and restrictive DL (direct lung) steam. The precisely adjustable Airflow offers a wide range of draft resistance and the Airflow decorative ring can also be customised in colour.
The new 1.0 Ohm Z-Coil (20-25 Watt) which also supports a little more draught, provides even more taste and steam.

The Zenith Pro Tank can be easily filled from the top by turning the topcap.