High-End
-
Squape X Tankverlängerung
This Spuape X Tank Estension is a tank extension for the SquapeX, Squape X [s] and Squape X nano vapors by Stattqualm. The capacity increases with each tank extension by 2.5ml.
The assembly is very simple - simply unscrew topcap and unscrew the tank extension.
Learn More -
SX Mini G Class
Mit dem SX Mini G Class aus dem Hause Dongguan Yihi Electronic Co. betritt ein high-end Bolide die Dampferszene. Schon beim auspacken merkt man gleich, dass es sich hierbei nicht um irgendein günstiges Modell handelt und spätestens nach dem einschalten merkt man auch, dass dieser Mod einem sehr viel zu bieten hat, in vielerlei Hinsicht.
Befeuert wird der SX Mini G Class von einem YiHi SX550J Chip und als Display komm ein kleines IPS Panel zum Einsatz, was in einem schönen und scharfen Bild resultiert. Zum navigieren im Menü hat man einen kleinen Joystick, der so am Gerät platziert ist, dass man ihn problemlos mit nur einer Hand bedienen kann. Und wer nicht am Gerät selber die Einstellungen vornehmen will, der installiert sich entweder die App SXi (für Android & iOS) oder installiert die PC-Software. Um Anpassungen über die Software vornehmen zu können, muss man sein Handy per Bluetooth mit dem Mod koppeln, danach kann man sich austoben. Die Software bietet unter anderem die Möglichkeit, um nach Firmware Updates zu schauen, den Displayhintergrund zu ändern oder eben die Modis seinem eigenen Geschmack nach anzupassen.
Als Akkus kommen beim SX Mini jeweils 2x 18650 Zellen (nicht im Lieferumfang enthalten) zum Einsatz, damit kann das Gerät mit bis zu 200W feuern. Als Modis stehen VW, Bypass und TC zur Wahl, wobei grad der TC Modus mit einem interessanten Detail aufwarten kann: Variable Joule. Dieser Mode kann mit Stainless Steel, Ni200 und Ti01 Drähten genutzt werden (Widerstand: 0,05 Ohm bis 1,0 Ohm im Joule Modus), wobei man sich schon erst mit den Eigenheiten von Joule vertraut machen sollte. Auch verfügt der Mod im Temperaturmodus über eine Anti-Dry Burning Technologie, sprich Dry Hits sollten dadurch der Vergangenheit angehören.
Auch bei den Output Modis hat der Nutzer die Qual der Wahl, denn es stehen so einige Modis zur Auswahl: von Eco zu Standard über Powerful zu Powerful+ bis hin zu den SXiQ_S1 bis SXiQ_S5. Grad die Output Modis SXiQ_S1 bis S5 bieten wiederum die Möglichkeit, dass man sich die Output-Kurve selbst an den eigenen Geschmack anpassen kann. Man sieht, der Mod ist vollgestopft mit hochwertiger Technik und bietet unzählige Möglichkeiten.
Achtung! In der neusten Version wird der Akkuträger entsperrt durch 3x drücken der Feuertaste und nach unten ziehen des Joysticks.
-
SQuape E[motion] 4.5ml
The SQuape E [motion] 4.5ml is a completely developed in Switzerland and manufactured tank self-winding evaporator from smoke instead GmbH for atomizing e-liquid. The SQuape E [motion] can be completely closed by turning the cap, whereby the evaporator is absolutely leak-proof. Due to the closed system, the tank can be removed and transported from the base irrespective of the filling level. In daily use you only need to turn the cap to refill - that's it! The risk of short circuit is completely dispelled by the smart power management and the non-conductive surface structure of the whole evaporator interior from emataliertem and anodized aluminum.
Learn More
The SQuape E [motion] is a development of SQuape R [eloaded] and R [s], where it was equipped with influences from SQuape X [Search]. The evaporator is ideally suited for self-winding beginners as well as professionals. Three different decks are available for the evaporator: Deck We (included), Deck Be and Deck De. In addition to the innovative TopFill and closure capability, the SQuape E offers improved poles for mounting the wire in contrast to the SQuape R. Another difference to the SQuape R is the revised Air-Flow-Control (AFC), which is perfectly suited for both OpenDraw and the addition of the MTL kit for mouth-to-lung stethoscopes. -
Squape MTL Kit 1.3/2.0/2.5mm SQuape E
The MTL Kit 1.3 / 2.0 / 2.5mm SQuape E reduces the direct air supply to the windings and has been specially developed for mouth-to-lung steamers.
Installation: Select the preferred size and screw it into the deck We or Be from below. For this you need a 2.5mm Allen key.
Learn More -
DECK "Be" SQuape E
The Power Single Coil Deck! The "Be" SQuape E deck is characterized by its wide cotton pockets and extended options. Try on this deck many different windings. The deck is excellent for cotton wool. Insert a pin with a diameter of up to 3.5mm into the two notches and attach the wire ends to the brackets. Then pull the cotton wool through the winding and shorten the cotton wool to the length of the base. Put the cotton wool into your pockets - done. Absolutely simple and simple.
For mouth-to-lungs: please use the MTL kit and screw it from below into the deck. For this you need a 2.5mm Allen key.Recommended for this deck: 0.25 - 2.0 Ohm / 10 - 75 W
Learn More -
DECK "De" SQuape E
Das DualCoil Deck! Geeignet für den erfahrenen Dampfer. Das Deck "De" SQuape E zeichnet sich durch seine zwei breiten Kanäle und den beiden Luftführungen direkt zu den beiden Wicklungen aus. Das Deck ist für Watte, Faser und Mesh hervorragend geeignet. Legen Sie zwei Stifte mit bis zu 3mm Durchmesser einfach die beiden Kanäle und befestigen Sie die Drahtenden im selben Moment an den Halterungen. Danach ziehen Sie die Watte durch die Wicklungen und kürzen die Watte auf die Länge des Decks (schräg zum Deck schneiden). Die Watte noch etwas ausrichten. - fertig.
Nutzen Sie beide Luftöffnungen der AFC für den leichten Luftzug oder stellen Sie ihn nach Ihren Wünschen ein.Empfehlung für dieses Deck: 0.25 - 1.0 Ohm / 20 - 75 W
Learn More -
Centerpin SQuape E
Center contact SQuape E and X incl. O-ring. Centerpin SQuape E.
Learn More -
Replacement set SQuape E
Replacement set SQuape E with O-rings and spare screws for the SQuape E.
Learn More -
SQuape E[motion] 2.0ml
The SQuape E [motion] 2.0ml is a tank self-leveling evaporator from the company StattQualm GmbH, completely developed and manufactured in Switzerland, for nebulizing E-Liquid. The SQuape E [motion] can be completely closed by turning the cap, whereby the evaporator is absolutely leak-proof. Due to the closed system, the tank can be removed and transported from the base irrespective of the filling level. In daily use you only need to turn the cap to refill - that's it! The danger of short-circuiting is completely eliminated by the clever current guide and the non-conductive surface structure of the entire interior of the evaporator made of ematalised and anodized aluminum.
Learn More
The SQuape E [motion] is a further development of the SQuape R [eloaded] and R [s], with the influence of the SQuape X [dream]. The evaporator is ideally suited for self-winding beginners as well as professionals. Three different decks are available for the evaporator: Deck We (included), Deck Be and Deck De. In addition to the innovative TopFill and closure capability, the SQuape E offers improved poles for mounting the wire in contrast to the SQuape R. Another difference to the SQuape R is the revised Air-Flow-Control (AFC), which is perfectly suited for both OpenDraw and the addition of the MTL kit for mouth-to-lung stethoscopes.Regular Price: CHF162.95
Special Price CHF99.90
Delivery Time: 2-3 Arbeitstage
-
AFC Ring farbig SQuape E
AFC Ring für die SQuape E-Serie
Learn More
Farben: Schwarz, Blau, Rot, Grün, Violett und Orange